There are few things we love more than a great weekend getaway to the mountains – outdoor adventures, cozy nights and long conversations with good company. And maybe a ShotSki here and there. Whether it’s the first run of the season or the last run of spring, we think a ShotSki is the perfect way to celebrate the good times. After all, friends don’t let friends (shot) ski alone. We’re digging back into the Toad archives to bring back a refresher on How To Build the Perfect ShotSki from Jeremy Benson at skinet.com:
1. Find the perfect ski
The first step (and arguably most important) in creating the perfect shotski is finding the right ski. If you don’t have old skis, ski shops will often have some pairs lying around (especially if it’s nearing the end of ski season). Remember, the longer the ski is, the more shots you can fit on it. Most standard skis will fit 4 shots, but go for the gold and see how many you can fit comfortably.
2. Glued vs. Nested
There are two basic types of shotskis: The layman’s sit on top, where you simply measure out where to put your shot glasses then glue (or tape!) them down. Then there’s the nested shotski where shot glasses rest inside the ski and can be removable to facilitate the cleaning process. We went for the nested version, because go big or go skiing later.
While perfection isn’t absolutely necessary with a shotski (you are, after all, drinking liquor from a ski), equal spacing will allow for easier maneuvering. First, pick the number of shots you’d like to have on your ski. Four is a nice round number and a good starting loin, but by all means try to get more on. Ideally, shots are approximately 18 – 20 inches apart, enough room for folks to face the shot ski head on. Make marks that are centered in the ski width-wise and get ready to drill.
For the nesting tactic, we used a hole saw to drill the holes (a large paddle drill bit may also work). Ideally all of your shot glasses will be the same size. Figure out what diameter your glasses are by measuring them and finding a comparable size hole saw or drill bit (we used a 1.5-inch diameter hole saw). Line it up with the marks you made earlier and drill, being careful not to drill all the way through the base. By stopping your holes just above the base you can remove the core samples, making perfect, countersunk holes for the glasses to sit in. A flathead screwdriver or a chisel work great for cleaning out the holes. It is important to note that many skis out there have fiberglass, wood, metal and plastic in them, so be careful not to breathe in any fumes and wear safety glasses or goggles to protect your eyes.
After the holes are drilled and cleaned out, smooth out any imperfections with sandpaper. If you want the glasses to be permanently attached, super glue them into place. For removable glasses, use Velcro to hold them in place when the shotski is in use. Having removable shot glasses makes cleaning way easier (and promotes future shotskis).
6. Deploy the Ski-shot
Call on some good company, pick your favorite brand of whiskey (add some maple syrup to each shot to do it the Canadian way) and take it for a run! Take shots to thank the snow gods for fresh powder or to urge them to make it snow. Mount it above the fireplace, keep it in the garage, sleep with it under your pillow, keep it in your car, give it to a college kid… Whatever you do with your shotski, hopefully it involves good times, deep snow and good friends. Bottoms up!
Look Good While You’re At It
Not Big On Shots?
Try some of our other delicious drinking activities. We love a good game of Kings Cup, which only requires that you drink beer. If you are in the mood to mix it up, try making some of these cold weather specialties.